Determining the natural frequencies and mode shapes of rotating turbomachinery components from both rotating and stationary reference frames is of paramount importance to avoid resonance problems that could affect the normal operation of the machine, or even cause critical damages in these components. Due to their similarity to real engineering cases, this topic has been experimentally analyzed in the past for disk-shaft assemblies and rotor disk-blades assemblies (bladed-disk or blisk). The same topic is less analyzed for disk-blades-disk assemblies, although such configurations are widely used in centrifugal closed impellers of compressors, hydraulic pumps, pump-turbines, and runners of high head Francis turbines. In this paper, experimental measurements, varying the rotating speed of a disk-blade-disk assembly and exciting the first natural frequencies of the rotating frame, have been performed. The rotating structure is excited and measured by means of PZT patches from the rotating frame and with a Laser Doppler Vibrometer (LDV). In order to interpret the experimental results obtained from the stationary frame, a method to decompose the diametrical mode shapes of the structure in simple diametrical components (which define the diametrical mode shapes of a simple disk) has been proposed. It is concluded that the resonant frequencies detected with a stationary sensor correspond to the ones predicted with the decomposition method. Finally, a means to obtain equivalent results with numerical simulation methods is shown.

+More

real engineering diskbladedisk assembly rotating turbomachinery components first natural frequencies of the rotating frame rotor diskblades assemblies disk pzt patches centrifugal closed impellers of compressors hydraulic pumps pumpturbines and runners of high head francis diametrical mode shapes of machine rotating and stationary reference frames diskbladesdisk resonant numerical simulation methods laser doppler vibrometer resonance problems stationary sensor simple diametrical components

Alexandre Presas,David Valentin,Carme Valero,Monica Egusquiza,Eduard Egusquiza,.Experimental Measurements of the Natural Frequencies and Mode Shapes of Rotating Disk-Blades-Disk Assemblies from the Stationary Frame. 9 (18),.

Alexandre Presas,David Valentin,Carme Valero,Monica Egusquiza,Eduard Egusquiza,"Experimental Measurements of the Natural Frequencies and Mode Shapes of Rotating Disk-Blades-Disk Assemblies from the Stationary Frame" 9

Alexandre Presas,David Valentin,Carme Valero,Monica Egusquiza,Eduard Egusquiza,"Experimental Measurements of the Natural Frequencies and Mode Shapes of Rotating Disk-Blades-Disk Assemblies from the Stationary Frame"