This study is to develop a micromachining technology for a light guidepanel(LGP) mold, whereby micro dot patterns are formed on a LGP surface by a singleinjection process instead of existing screen printing processes. The micro powder blastingtechnique is applied to form micro dot patterns on the LGP mold surface. The optimalconditions for masking, laminating, exposure, and developing processes to form the microdot patterns are first experimentally investigated. A LGP mold with masked micro patternsis then machined using the micro powder blasting method and the machinability of themicro dot patterns is verified. A prototype LGP is test- injected using the developed LGPmold and a shape analysis of the patterns and performance testing of the injected LGP arecarried out. As an additional approach, matte finishing, a special surface treatment method,is applied to the mold surface to improve the light diffusion characteristics, uniformity andbrightness of the LGP. The results of this study show that the applied powder blastingmethod can be successfully used to manufacture LGPs with micro patterns by just singleinjection using the developed mold and thereby replace existing screen printing methods.

+More

lgps with micro patterns masking laminating exposure machinability of themicro dot patterns light guidepanellgp mold micro powder blastingtechnique lgpmold surface treatment shape analysis light diffusion characteristics uniformity micromachining technology masked micro patternsis screen printing methods singleinjection process

Myeong Woo Cho,Ho Su Jang,.Micro Dot Patterning on the Light Guide Panel Using Powder Blasting. 8 (2),.

Myeong Woo Cho,Ho Su Jang,"Micro Dot Patterning on the Light Guide Panel Using Powder Blasting" 8

Myeong Woo Cho,Ho Su Jang,"Micro Dot Patterning on the Light Guide Panel Using Powder Blasting"