For the past few decades, a significant number of research efforts have been devoted to the studies of SCF values and parametric design formulae at certain positions in various uniplanar and multi-planar tubular joints. However, very few investigations on the multi-planar overlapped tubular joints have been reported. The main reason may lie in the complexity of combining effects between multi-planarity and overlapping. In this paper, a novel framework for deriving the unified SCFs is proposed by reducing joint modeling from multi-planar out-of-plane overlapping to equivalent uniplanar non-overlapping. By integrating the equivalent beam model with solid finite element modeling for the overlapped tubular KK-joint in offshore jack-ups, the procedures for computing the unified SCF values in the equivalent beam stick model are successfully developed. Verification of the proposed framework is obtained by comparing the unified SCFs based on basic load cases with those based on actual wave loading typically experienced by the jack-up.

+More

jackup unified scf values multiplanarity overlapped tubular italickkitalicjoint solid finite element modeling uniplanar and multiplanar tubular joints parametric design formulae load cases wave loading equivalent beam model multiplanar outofplane overlapping joint modeling

Ying Luo, Jin Jiang,Jian Zhang, Wei Shen,.A novel framework for deriving the unified SCF in multi-planar overlapped tubular joints. 60 (0),.

Ying Luo, et al."A novel framework for deriving the unified SCF in multi-planar overlapped tubular joints" 60

Ying Luo, Jin Jiang,Jian Zhang, Wei Shen,"A novel framework for deriving the unified SCF in multi-planar overlapped tubular joints"