Welcome to the IKCEST

CRYSTAL GROWTH & DESIGN | Vol.9, Issue. | 2009-05-30 | Pages 6

CRYSTAL GROWTH & DESIGN

Solution-Based Synthesis of a CdS Nanoparticle/ZnO Nanowire Heterostructure Array

Lee, JS    Hong, SJ    Tak, Y    Yong, K  
Abstract

CdS nanoparticle (NP)/ZnO nanowire (NW) heterostructure arrays were fabricated by a two-step chemical solution deposition method. First, vertically aligned ZnO nanowire arrays were grown on a substrate from Zn(NO3)(2) (10 mM) and an aqueous ammonia (pH similar to 11) solution at 95 degrees C for 6 h. Then, CdS nanoparticles were deposited on the ZnO nanowire array in a chemical bath containing CdSO4, thiourea, and an aqueous ammonia solution (molar ratio of 1:5:500) at 60 degrees C. The effects of deposition reaction conditions, such as solution concentrations and deposition time, were investigated. Synthesized US NP/ZnO NW heterostructures were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), and transmission electron microscopy (TEM), and their optical absorption property was measured by light absorbance spectrometry. As the solution concentrations and deposition time increased, the sizes and density of CdS nanoparticles on the surfaces of ZnO nanowires increased and the visible-light absorption capability was improved. The CdS NP/ZnO NW heterostructure arrays presented here offer promising applications in solar-energy converting devices. The photoelectrochemical cells using CdS NP/ZnO NW heterostructure arrays as photoelectrodes showed enhanced photocurrent characteristics compared with the photoelectrode cell of a bare ZnO nanowire array.

Original Text (This is the original text for your reference.)

Solution-Based Synthesis of a CdS Nanoparticle/ZnO Nanowire Heterostructure Array

CdS nanoparticle (NP)/ZnO nanowire (NW) heterostructure arrays were fabricated by a two-step chemical solution deposition method. First, vertically aligned ZnO nanowire arrays were grown on a substrate from Zn(NO3)(2) (10 mM) and an aqueous ammonia (pH similar to 11) solution at 95 degrees C for 6 h. Then, CdS nanoparticles were deposited on the ZnO nanowire array in a chemical bath containing CdSO4, thiourea, and an aqueous ammonia solution (molar ratio of 1:5:500) at 60 degrees C. The effects of deposition reaction conditions, such as solution concentrations and deposition time, were investigated. Synthesized US NP/ZnO NW heterostructures were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), and transmission electron microscopy (TEM), and their optical absorption property was measured by light absorbance spectrometry. As the solution concentrations and deposition time increased, the sizes and density of CdS nanoparticles on the surfaces of ZnO nanowires increased and the visible-light absorption capability was improved. The CdS NP/ZnO NW heterostructure arrays presented here offer promising applications in solar-energy converting devices. The photoelectrochemical cells using CdS NP/ZnO NW heterostructure arrays as photoelectrodes showed enhanced photocurrent characteristics compared with the photoelectrode cell of a bare ZnO nanowire array.

+More

Cite this article
APA

APA

MLA

Chicago

Lee, JS ,Hong, SJ ,Tak, Y ,Yong, K,.Solution-Based Synthesis of a CdS Nanoparticle/ZnO Nanowire Heterostructure Array. 9 (),6.

Disclaimer: The translated content is provided by third-party translation service providers, and IKCEST shall not assume any responsibility for the accuracy and legality of the content.
Translate engine
Article's language
English
中文
Pусск
Français
Español
العربية
Português
Kikongo
Dutch
kiswahili
هَوُسَ
IsiZulu
Action
Recommended articles

Report

Select your report category*



Reason*



By pressing send, your feedback will be used to improve IKCEST. Your privacy will be protected.

Submit
Cancel